- Joined
- Jan 6, 2016
- Messages
- 91
- Reaction score
- 0
- Location
- Lynchburg, VA
- My Car
- 2001 Cobra convertible. 1971 Mach 1 351 C 4V 4 speed
Amen to that... good plastic is hard to find... sometimes better to clean up and spray dye what you have.. could save you lots of moneyHey just a FYI
ANY plastic interior parts you remove should be done with care, and stored safely
The interior quarter panels you have stacked up are HARD to come by
The pillar trims are like gold
Don
Tim,Looks like the Mach 1 was originally Grabber Lime--from the floor pans coloring. What color have you chosen for the final edition?
KC,I have to ask what you did with the shifter boot? If you don't want it and even if you cut it off I am interested in buying it from you.
Thanks!
kcmash
Doug,Amen to that... good plastic is hard to find... sometimes better to clean up and spray dye what you have.. could save you lots of moneyHey just a FYI
ANY plastic interior parts you remove should be done with care, and stored safely
The interior quarter panels you have stacked up are HARD to come by
The pillar trims are like gold
Don
Doug in Indy
Greg,Hi Dave,
A late welcome from me , Greg, from Brisbane, Australia.
I must say that project represents one hell of a challenge. If you don't mind me asking out of curiosity, what drew you to this particular car to start with?
Thanks,
Greg.
Hi again Dave,Greg,Hi Dave,
A late welcome from me , Greg, from Brisbane, Australia.
I must say that project represents one hell of a challenge. If you don't mind me asking out of curiosity, what drew you to this particular car to start with?
Thanks,
Greg.
It seemed cheap, was 351C 4V and not the least it was a 4 speed. In the end I may rethink the cheap part.
Enter your email address to join: