1971 Mach1 rear end sway bar links

Dirconmach1 · May 15, 2023

I’ve searched around and found nothing on the web. Can someone who has done this point me in the right direction. There 10 inches long and the spindle is about 5 1/4 inches long. I’m hopeful I can buy them somewhere and not have to make them. Thanks

boilermaster · May 15, 2023

Dircronmach1,
not a big deal to make them if you know someone at a parts store.
you really only need to know your mach's bolt and spacer lenght.
I found a set and only had to cut the spacer by like 1/4''
wish I could remember the part number or the application.
The good part is they will cost about half the price of the actual mustang link kits.
Boilermaster

Dirconmach1 · May 15, 2023

boilermaster said:
Dircronmach1,
not a big deal to make them if you know someone at a parts store.
you really only need to know your mach's bolt and spacer lenght.
I found a set and only had to cut the spacer by like 1/4''
wish I could remember the part number or the application.
The good part is they will cost about half the price of the actual mustang link kits.
Boilermaster

Thanks for the info. Your right. I will probably save me some money. I guess they don’t make them yet. Thanks for your help

Sheriff41 · May 15, 2023

https://www.npdlink.com/product/end-link-kit-sway-bar/104896/200357

Dirconmach1 · May 15, 2023

Sheriff41 said:
https://www.npdlink.com/product/end-link-kit-sway-bar/104896/200357

I looked at that part and wasn’t sure if was the correct one since it didn’t give any information on the part size, length etc. Have you use this part? If so, where you happy with it?

Sheriff41 · May 15, 2023

Dirconmach1 said:
I looked at that part and wasn’t sure if was the correct one since it didn’t give any information on the part size, length etc. Have you use this part? If so, where you happy with it?

No, I haven't used it but the part fitment information says it's for the rear sway bar.