351 C Ignition

[metalfan302]

How's it going every one. I am mid build in to my 351 Cleveland build. I am having some issues trying to figure out what ignition to use with it. So bit about it it is a bored .030 over stock bottom minus piston being forged. I am projecting a 10.2/1 compression and running the comp cam 280H hydraulic flat tappet. The heads are the 3v aussie aluminum with 63cc and 2.19/1.78. Any help is appreciated.

 

[delawarebill]

u have a few options, so is there something u are leaning towards??

u have pertronix or another brand similar, new dizzy with electronic's.

 

[Stanglover]

If you can search for a thread of mine, "Which aftermarket distributor to buy -351C 4V" dated  06/05/2016 and read through it, especially the last 2 pages, you will learn what I learned and figured out for MY engine. There is a load of great help and suggestions within. I think it will pretty much answer all your questions, but don't be afraid to ask for clarification or more help. Your build may be a bit different, but I think this will be a good start and you can tweak from there.

Geoff.