Parts For Sale 72 351CJ engine for sale

[roboconklin]

I have a q code engine assembly with most accessories a/c compressor,p/s pump ,alt ,starter. It was in a 72 Mach 1 c-6 car. I drove it before removing all. The trans is not correct,but woks well. Robert (407)405-7306

 

[Tnfastbk]

Please add a price as it is a requirement here for parts that are for sale.

 

[roboconklin]

2k for engine w/ accessories and c-6 trans matching dash top and title. 1k for doors with glass and panels,and fast back deck . Have power brake pedal frame w/lever and pedal assembly and emergency brake pedal assembly $120. The dash and misc. trim $75?and the steering column$50

 

[roboconklin]

2k for engine w/ accessories and c-6 trans matching dash top and title. 1k for doors with glass and panels,and fast back deck . Have power brake pedal frame w/lever and pedal assembly and emergency brake pedal assembly $120. The dash and misc. trim $75?and the steering column$50

 

[Billw69]

Do you have the two rear corner plastic trim panels that join on each side of the trap door opening of the rear deck? If so, and they’re in decent shape I’m interested.

Thnax

 

[roboconklin]

Do you have the two rear corner plastic trim panels that join on each side of the trap door opening of the rear deck? If so, and they’re in decent shape I’m interested. Car did not have a fold down back seat. Do you mean interior quarter panel?

Thnax

 

[roboconklin]

The car didn’t have a fold Don back seat. Did you mean the interior quarter panels?

 

[Billw69]

Yes I did. Sorry, I need the fold down version.

Thnx

 

[basstrix]

Do you have any A-pillar trim for fastback that are in good condition and not dried out/brittle? I need drivers side and as soon as I touch the passenger side, will probably need that one too.

 

[roboconklin]

Do you have any A-pillar trim for fastback that are in good condition and not dried out/brittle? I need drivers side and as soon as I touch the passenger side, will probably need that one too.

I have. They are not in good shape. I found some aftermarket ones made from fiberglass for my project c code 429 71. I updated many things .. I drive it kinda hard

 

[Orrasneb]

2k for engine w/ accessories and c-6 trans matching dash top and title. 1k for doors with glass and panels,and fast back deck . Have power brake pedal frame w/lever and pedal assembly and emergency brake pedal assembly $120. The dash and misc. trim $75?and the steering column$50

Is the column complete with electrical elements and key? Will you ship prepaid?
Thanks

 

[roboconklin]

It is complete. The turn signal switch and ignition switch are all there and it has a key cylinder with key. The steering wheel is not pretty. I have never shipped anything that big. I don’t know where to take it or the cost. Are you familiar with the process? I can look into it

 

[Orrasneb]

Thanks for checking, I purchased one off eBay yesterday.
Fedex is shipping for $46

 

[Superbond]

How many miles on the motor?

 

[roboconklin]

How many miles on the motor?

 

[roboconklin]

Not many,but needs to be updated to non leaded fuel

 

[Superbond]

How much for just the motor no transmission. 72 has the small valves correct. Thanks

 

[Bobby]

Can you post a pic of the steering column? Is it a tilt column?

 

[roboconklin]

Can you post a pic of the steering column? Is it a tilt column?

Not a tilt

 

[roboconklin]

How much for just the motor no transmission. 72 has the small valves correct. Thanks

$1800. I was just throwing in the trans for good measure