73 front plate bracket bolts

73greengold

Well-known member
Joined
Jul 13, 2010
Messages
101
Reaction score
0
Location
Shawnee, KS
My Car
73 convertible
302 2bbl
Ram Air
Guys, does anyone know what size bolts I need to mount my front plate bracket to my urethane bumper?

Marty

 
Joined
Jul 14, 2010
Messages
506
Reaction score
0
Location
CLINTON. ILLINOIS
My Car
73 mach 1, 73 fastback, 07 f150, , 09 HD ultra classic
I'll check Monday if nobody answers you by then. I got a new bracket from Don OMS not too long ago so my bolts will come right out. Do you need the length and diameter. Mark

 
B

BigPinoyHunk

Guest
i had to install new bolts when i put mine in. i believe they are 3/8 fine thread (3/8x24) and you really can put some long bolts into there. i can check as well in the morning.

 

73greengold

Well-known member
Joined
Jul 13, 2010
Messages
101
Reaction score
0
Location
Shawnee, KS
My Car
73 convertible
302 2bbl
Ram Air
i had to install new bolts when i put mine in. i believe they are 3/8 fine thread (3/8x24) and you really can put some long bolts into there. i can check as well in the morning.
Thanks guys, beats the hell of of guessing and buying different bolts at the hardware store. That way usually assures me at least 2 trips to the store before I find the right ones.;)

 
Joined
Jul 14, 2010
Messages
506
Reaction score
0
Location
CLINTON. ILLINOIS
My Car
73 mach 1, 73 fastback, 07 f150, , 09 HD ultra classic
There are 6 bolts that are across the bottom of the bumper. It is held on with the 2 middle bolts. They look like 5/16 - 1 1/8 from the bottom of the washer.

Here's a link for bumper bolts from OMS. I think these are the ones you need or if you have any of the 6 bottom bumper bolts they should be the same. Just match it up.

http://www.ohiomustang.com/store/order_page.asp?itemid=2071

 
Top