Alternative clock movement

[TheRktmn]

If you want to update it, I posted this 4/8/22 Fixing that broken clock. https://7173mustangs.com/threads/fixing-that-broken-clock.40667/ . You can use a buck converter if you want to wire it back in. It will drop the voltage from 12v to 1.5v.

Your solution is very similar to my 2nd gen conversion.

 

[DAverkamp]

Your solution is very similar to my 2nd gen conversion.

Your solution is very similar to my 2nd gen conversion.

Thanx BW, I read through your post the other day.
I'm batting 1000 so far with RM so let's see if I only need some routine maint he can perform as all its other functions are intact.

 

[BushwackerBob]

Agreed, the more original the better. I just contacted RM to see if he can do a little tach work for me. He's got a very good reputation.

 

[DAverkamp]

Agreed, the more original the better. I just contacted RM to see if he can do a little tach work for me. He's got a very good reputation.

He did my ***** light to tach conversion... A+, did my center counsel gauges/amp to volt/and was there to answer questions during connection questions with Midlife's harness, A++! Those cats are the dynamic dual.

 

[midlife]

On behalf of Rocketman and myself: "Awww schucks"

 

[midlife]

If you want to update it, I posted this 4/8/22 Fixing that broken clock. https://7173mustangs.com/threads/fixing-that-broken-clock.40667/ . You can use a buck converter if you want to wire it back in. It will drop the voltage from 12v to 1.5v.

What is a buck converter?

 

[BushwackerBob]

https://www.aliexpress.com/item/100...-1;0.81;-1;-1@salePrice;USD;search-mainSearch
Buck Converter. These are available on eBay and Amazon too. You just have to pay 3 to 4X more for them. Great device.