Best bet for rear taillight sockets?

[73inNH]

I have a flakey socket out back. I suspect I could rehab it, but I'm wondering if there are good options for rear taillight/ brake sockets that I can splice in?

 

[midlife]

I'm going to follow this thread closely. AFAIK, there are no decent reproductions of any 7123 tail-light sockets.

 

[351c1971]

Check out Standard Motor Parts S510 and S98 at Rock Auto. I used S510 for the Mach1 grille running lights. They might work for the tail lights as well.

 

[mrgmhale]

I purchased a used trunk loom from WCCC the other week. In a few weeks I plan to merge/meld it into a 70 Mercury Cyclone with LED “bulbs,” and a turn signal flash sequencer. All 1157 and other sockets were in very good condition. Check eBay also.

 

[Doug's 73 Mach1]

Here are two originals a two aftermarket. The aftermarket is identical except for the ground male spade location. Bought the aftermarket ones way back in the 1990s, so don't know where I got them. Let me know if interested in the originals or the aftermarkets or both.

Doug

 

[Ryunker]

Here are two originals a two aftermarket. The aftermarket is identical except for the ground male spade location. Bought the aftermarket ones way back in the 1990s, so don't know where I got them. Let me know if interested in the originals or the aftermarkets or both.

Doug View attachment 76919

I have interest after the op

 

[73inNH]

I have interest after the op

Ryunker can have them, thanks for the offer!