Camshaft Specs.

[Steven Harris]

Well I pulled what was left of the 351C out of the car and was able to look into it today. I was hoping to find out something about my camshaft.

The lifters say Johnson HT 900. The cam has a few casting numbers but no name. Towards the front it has CWC and the number 1208. Towards the rear it has 01 and 16. On the rear face are stamped the numbers 965720 and 667

 

[c9zx]

Likely this http://www.summitracing.com/parts/SLP-CS-667 CWC builds basic blanks for a LOT of cam companies. Chuck

 

[Steven Harris]

Thank you Chuck,

So is this a basic stock replacement cam? What type of horsepower will the motor put out with a four barrel intake and carb?

 

[73vertproject]

Dang, Steve, those CMC blanks can be ground 1000 different ways, and I can't make heads or tails of what you've got. Hopefully someone will come along with more info that I've got.

Doc

 

[pegasus]

The best I can come up with is that it's a Sealed Power Cam,

http://www.summitracing.com/parts/SLP-CS-667/

OOOP's Sorry c9zx didn't see that link

 

[c9zx]

Thank you Chuck,

So is this a basic stock replacement cam? What type of horsepower will the motor put out with a four barrel intake and carb?

If it is the cam I think it is, it is a stock replacement 2V cam. Perhaps + 10HP depending on which intake and carb are used. If you want to change the cam for more performance consider the overall goal and match all components to that goal (cam, springs, gear ratio, compression ratio, exhaust, convertor, etc.). Chuck