MotoArts
Well-known member
- Joined
- May 30, 2011
- Messages
- 937
- Reaction score
- 6
- Location
- Pittsburgh, PA
- My Car
- '71 Sportsroof
'90 Mustang 7-Up 5.0 ragtop (sold after 20 years)
'66 Sunbeam Tiger Mk.IA
Has anybody tried this?
I want to use AN fittings and braided SS line with the stock sending unit.
Is there an adapter that can be slipped over the bulbed end of the sender and tightened, or a solder-on piece?
I've found adapters to go from EFI to AN, but not carbed to AN.
Looking to stay with 3/8" ID (-6), but would probably convert to 1/2" (-8) if replacing the sender's pickup tube is required.
Not looking to do the worm clamp with fake fitting cover deal (ala Russell Tube Seal).
I want to use AN fittings and braided SS line with the stock sending unit.
Is there an adapter that can be slipped over the bulbed end of the sender and tightened, or a solder-on piece?
I've found adapters to go from EFI to AN, but not carbed to AN.
Looking to stay with 3/8" ID (-6), but would probably convert to 1/2" (-8) if replacing the sender's pickup tube is required.
Not looking to do the worm clamp with fake fitting cover deal (ala Russell Tube Seal).