- Joined
- Nov 3, 2011
- Messages
- 86
- Reaction score
- 1
- Location
- elk grove il
- My Car
- 73 mustang convertible
94 mustang gt convertible
I just pulled the gauge assembly out of my 73 convertible to replace the pc board and lights. I found that the old owner had electrical taped two bulbs holders down to the assembly to hold them in place. Is there any way to repair the light mounting holes. i am thinking about using a thin piece of plastic maybe 2"x2" cutting the mounting hole into the plastic and glueing this over the original hole.
are there any other suggestions.
thanks george
are there any other suggestions.
thanks george