Donor found

[Newold]

Brought it home for some winter homework

And free up some space and time for My poor brother Greg Schroeder. He don’t know it yet but next he will have the fun part in building the motor. Now to get started cleaning trim

Sent from my iPhone using Tapatalk

 

[Newold]

A bit more fitting before these get cleaned and painted

Sent from my iPhone using Tapatalk

 

[Newold]

Here goes nothing

Sent from my iPhone using Tapatalk

 

[Newold]

Was i close?

Sent from my iPhone using Tapatalk

 

[73pony]

Looks good. Nice work.

 

[mach71351c]

Looks like you nailed it! Nice job.

 

[Newold]

Got my new sail panels maid. Hope to install today

Sent from my iPhone using Tapatalk

 

[Newold]

Found a tilt column and rim blow wheel I think I’ll pick up next week [emoji3]

Sent from my iPhone using Tapatalk

 

[Newold]

Super excited. Got a great deal on a 532

Sent from my iPhone using Tapatalk

 

[jpaz]

Cool! That should be some fun.

 

[Newold]

Super excited

Sent from my iPhone using Tapatalk

 

[Carolina_Mountain_Mustangs]

Was i close?

Sent from my iPhone using Tapatalk

Hood looks way better than most just shiny but you cannot get the correct paint today either.

 

[Newold]

Ya I went with something I could maintain better.

Sent from my iPhone using Tapatalk

 

[Carolina_Mountain_Mustangs]

What heads are those?

 

[Newold]

Pro comp aluminum

Sent from my iPhone using Tapatalk

 

[Newold]

Still a ways to go but this is a little more motivation.

Sent from my iPhone using Tapatalk

 

[turtle5353]

i would check the internals of the procomp heads! If they have procomp springs, guides, and valves you can kiss that motor goodbye in a very short period of time.

 

[Newold]

i would check the internals of the procomp heads! If they have procomp springs, guides, and valves you can kiss that motor goodbye in a very short period of time.

I haven’t heard that before. I’ll check. Thanks

Sent from my iPhone using Tapatalk

 

[Newold]

i would check the internals of the procomp heads! If they have procomp springs, guides, and valves you can kiss that motor goodbye in a very short period of time.

You have any experience with them?

Sent from my iPhone using Tapatalk

 

[turtle5353]

Absolutely. Just do a quick search on google about ANYTHING Procomp. Its mostly Chinese knock off junk. I wouldn't run any of their stuff in my car. But i have heard of people having decent luck with their bare aluminum heads and putting in quality valvetrain components. I guess the castings are decent but the parts they put in them are absolute junk. Even the guides have a tendency to wear prematurely or break and fail.