Door/Window Components Reproduced?

[stanger007]

I'm going through the doors on my '72 Mach 1 replacing all the worn hardware - hit a few items that I am curious if they are reproduced in the aftermarket

Does anyone sell the plastic guides here? Mine have some slack.

How about the felt strips that are behind the bolt here and press against the glass to hold it tight?

This plug here is missing - perhaps where speaker wires used to run through the door jamb?

 

[OMS]

I'm going through the doors on my '72 Mach 1 replacing all the worn hardware - hit a few items that I am curious if they are reproduced in the aftermarket

Does anyone sell the plastic guides here? Mine have some slack.

How about the felt strips that are behind the bolt here and press against the glass to hold it tight?

This plug here is missing - perhaps where speaker wires used to run through the door jamb?

Pic 1 & 2 not being made

pic 3 at one time that door had factory speaker or PW wiring. No plug is made as only doors getting the wiring had this hole cut.

Don

 

[stanger007]

Pic 1 & 2 not being madepic 3 at one time that door had factory speaker or PW wiring. No plug is made as only doors getting the wiring had this hole cut.

Don

Thank you for the reply Don, the guides with felts were my largest concern but will not be hard to fab up a new set. I will contact you for a quote on window gaskets, door handles etc.

Wes

 

[Hemikiller]

The nylon guides for the window can occasionally be found on eBay in NOS form, I'll have to dig up the part #.

The felts can be sourced used. Let me know what you need, I have a drawer full of them.