I purchased new soft lines for the front disc caliper. When I went to bolt the soft line head to the caliper… didn’t really fit. Don’t understand the orientation of how it attaches to the caliper. Any help and pics would be great.
Front disc caliper to soft line
- Thread starter csdean007
- Start date
Help Support 7173Mustangs.com:
- Joined
- Jul 12, 2010
- Messages
- 5,435
- Reaction score
- 3,709
- Location
- Killingworth, CT
- My Car
- 71 Mach 1
71 XR-7 hardtop
71 Country Squire
65 hardtop
The angled flat on the bajo fitting aligns with the rib on the caliper. The hose should point forward. The hoses are left and right handed, as are the calipers.
csdean007
Member
- Joined
- Aug 21, 2023
- Messages
- 11
- Reaction score
- 0
- Location
- Tennessee
- My Car
- 1972 fastback mustang. Bought as a project after going through quit a few people.
Perfect… thank you so much. I thought that was correct but just didn’t sit well. I have never understood those banjo fittings. Especially the crush copper washer that aligns the hole in the bolt on the caliper. Just doesn’t make sense to me. Thank you again.
Just think of the crush washer as a 1,000 psi “O” ring.
Similar threads
