EvilPuppetMaster
Well-known member
- Joined
- Oct 27, 2016
- Messages
- 123
- Reaction score
- 1
- Location
- Ottawa
- My Car
- 1972 Mustang Mach 1 Q - code
Hi guys
So i am preparing to switch to fitech efi
And converted my tank using tankinc pa-4 retrofit kit
I am venting from the rollover valve to the outside of my tank
just wandering if you guys think that is good and safe way to vent the tank
I believe my gas cap is non vented style
Here is one image... it was taken before I added rollover valve with foot long hose attached to it.it is pointed to vent at the back of the tank.
Thanks
Alex
what is the molar mass of nh4 2so4
So i am preparing to switch to fitech efi
And converted my tank using tankinc pa-4 retrofit kit
I am venting from the rollover valve to the outside of my tank
just wandering if you guys think that is good and safe way to vent the tank
I believe my gas cap is non vented style
Here is one image... it was taken before I added rollover valve with foot long hose attached to it.it is pointed to vent at the back of the tank.
Thanks
Alex
what is the molar mass of nh4 2so4