I am dumb. And need help wiring alternator.

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sciabola13

Well-known member
Joined
May 22, 2017
Messages
89
Reaction score
0
Location
North Carolina
My Car
1971 Mach 1
I made the epic mistake of assuming I would remember how stuff goes back together...

Does the mid-leg terminal on Neg battery terminal connect to black post on alternator?

I assume so, but just wanted to check!

9bbd03d2ec4a429b2d08a08aa7b38b33.jpg


Sent from my iPhone using Tapatalk

 
That terminal connects to the bottom screw on the voltage regulator (on the fender apron) and the end connects to a bolt on the block.

Gotcha. What goes on that black terminal on alternator then?

Sent from my iPhone using Tapatalk

 
b50aca056f39485c4af688429fe177ea.jpg


This was my pic prior to disassembly, doesn’t look like anything was on Black terminal...

Sent from my iPhone using Tapatalk

 
By any chance, do you have a picture of the other end of the connector for the alternator, that goes into the harness?

I don’t. I left that all attached and wrapped it back and covered for painting front part of engine bay. I can get a pic of you need one?

Sent from my iPhone using Tapatalk

 
If it isn't too much trouble, yes I could use some shots of the entire harness, on both ends where possible...My harness is crap, at best..

No worries man. I already have it put back together, but I am happy to shoot some pics when I head out to the shop later this week!

Sent from my iPhone using Tapatalk

 
Back
Top