Main Body Harness Electrical Connector ID

[BFH 429]

Anyone out there know if a list exists that cross references harness connectors with Ford PN's? I'm in process of dropping in my Painless universal kit and I'd to replace as many ends as possible if they exist (as opposed to cutting them off my old harness). Del City, Allied and Mouser have indicated that a lot of these ends should still exist, but need the original Ford PN for cross reference. Looking on my original harness, no ID's appear to exist on the ends themselves, and the shop manual doesn't appear to call them out either.

Marc

 

[MikeGriese]

Maybe if you sent them some photos of what you are looking for they may have a better idea if they can supply it.

 

[Steve McMahan]

I pulled out my Assembly manual. Here is a typical page from the electrical section. It shows the connectors, but identifies them as part of a wiring assembly, I believe. I hope this helps ID the connectors you need.

 

[midlife]

Most bullet connectors are standard trailer connectors. No source for the curved turn signal connectors except used. Some pins are readily available; others are not so easy to find.

 

[BFH 429]

I pulled out my Assembly manual. Here is a typical page from the electrical section. It shows the connectors, but identifies them as part of a wiring assembly, I believe. I hope this helps ID the connectors you need.

View attachment 76290

Hi Steve - thanks for sharing. I don't have that manual here with me, but that was my next check. That is good to know there is some ID in that book. Maybe this combined with pictures may help me land on correct replacements.

 

[BFH 429]

Maybe if you sent them some photos of what you are looking for they may have a better idea if they can supply it.

Hi Mike, yes pictures are next, but that way could be tedious. It was my backup plan, and is what they also recommended too. Thanks!