My 1972 fastback resto mod

[Shoogie]

Hello everyone, I'm building a 72 fastback I got from NC and brought to Florida. It was a non running 302 car with a ton of rust. I broke down the car then I removed all the rusted metal from the car and sand blasted the front end. Replaced all the sheet metal, sealed it and painted it. I built a 347 stroker my self and a c4 trans with red plates and shift kit. Next I will be back halving the 72 with a checkers racing ladder bar four link pro street kit to accommodate my 20x14 coy c5 rims with Mickey thimpsons 29x18.00-20 tires.

 

[DK73]

Welcome from Denmark Northern Part of Europe [WINKING FACE] That sound like alot of Hard work! Would Bee awesome to see som photos of your Car[WINKING FACE] Regards Lars DK73

Sendt fra min E2303 med Tapatalk

 

[Shoogie]

http://tinypic.com/1r559paf

The link has pics of my build process.


I don't know how to bring in pics from tinypic

Welcome from Denmark Northern Part of Europe [WINKING FACE] That sound like alot of Hard work! Would Bee awesome to see som photos of your Car[WINKING FACE] Regards Lars DK73

Sendt fra min E2303 med Tapatalk

Thanks!

I put up link. Tried to put in post but it would not let me

 

[DK73]

Wow has just been on your Link. That is awesome photos wau your doing a very Nice work [THUMBS UP SIGN] Regards Lars

Sendt fra min E2303 med Tapatalk

 

[Wide-body71]

Welcome to the site. Car ideas sound great. Really looking forward to the build. If you want to post picks, look a little farther down from the "tiny pic" icon and you will see the blue banner that says "attachments" and there you will see " choose file". Tap that and choose from your photos or take a photo. Then tap "add attachment"and it will be above in the large white box. You will need to write a few words next to the attachment and then hit "post reply". Work looks great. Post many pics and updates. I really enjoy seeing different ideas and visions for these 71-73's

 

[Shoogie]

When I just got her home

 

[Shoogie]

Their tear down

 

[Shoogie]

All the rust cut out, cowel removed

 

[Shoogie]

Radiator support cut out, right side aprons replaced

 

[Shoogie]

Panel replacements

 

[Shoogie]

Sand blasted front half

 

[Shoogie]

Epoxy sealed and painted

 

[Shoogie]

Scat forged 347 lower end JEPistons AFR heads, ford racing 1.6 rockers, comp cams extreme cam for 2 stages of 200 shot, hydrolic comp lifters. Hardened 6.881 push rods. Summit 750 double pump street carb. But I think I am going with a Coyot motor now.

 

[Shoogie]

Engine mounted

 

[Shoogie]

Wow has just been on your Link. That is awesome photos wau your doing a very Nice work ?[THUMBS UP SIGN] Regards Lars

Sendt fra min E2303 med Tapatalk

Thanks

 

[Shoogie]

Welcome to the site. Car ideas sound great. Really looking forward to the build. If you want to post picks, look a little farther down from the "tiny pic" icon and you will see the blue banner that says "attachments" and there you will see " choose file". Tap that and choose from your photos or take a photo. Then tap "add attachment"and it will be above in the large white box. You will need to write a few words next to the attachment and then hit "post reply". Work looks great. Post many pics and updates. I really enjoy seeing different ideas and visions for these 71-73's

Thanks just loaded pics.

 

[Shoogie]

I am also in the middle of a 1967 mustang bills that is almost done

 

[73429mach]

Nice progress. Is that an original Grabber Blue car. Ryan.

 

[jbojo]

Nice job, car is looking really good!!