P/S Pump Mounting

[not2old]

I just finished bending a new fuel line from the pump to carb. Looks good too. Not sure if will clear fuel filter, so can someone shut me a pic of the P/S pump from top and back to see if it will clear.

Alan L

 

[FasTnNefariouS]

Does not appear it will clear. I got no pics but from the block to the PS pump is approx 1.75" gap.

Edit: Personally, I do better with pics, so I took some for you

Hope these help!

DJ

 

[not2old]

Thanks... Looks real tight

 

[FasTnNefariouS]

Thanks... Looks real tight

Your reply should;ve been "Opps, I cut the line in the wrong place. F#$#$ #$#$ #$#$#!" Sorry, had to go there. :angel: Still can fix with a thinner filter, but maintenance to that filter will be a little more challenging than if you had the filter horizontal near the carb.

Edit: Just realized you made your own line so no bigggie there. Just try to keep the filter near the carb inlet or above where you can easily get to it for maintenance. Also wanna keep it away from heat and that area gets very hot so not a good place.