PS pump brackets 351w and 351c same?

[vikingsandpintos]

Gathering parts up! lol

My 72 had a 351c motor, putting a 351w motor in it. At work, I looked in the Hollander interchange and it shows the pumps in 72 are all the same for all the motors, just the brackets need to be changed.

Will my Cleveland bracket fit the Windsor, or am I going to need one from a W? Thanks! Earl

 

[Mikes73]

The 351C power steering bracket won't work on the 351 windsor as I recall. The bolt holes won't line up with the water pump correctly.

 

[Mjordan]

Interested here as well, collecting parts also. If pressures will work with the steering gear I'm looking into swapping a complete foxbody accessory drive onto my Windsor build.

 

[jowens1126]

They do make aftermarket PS Brackets for a Saginaw Swap on the Windsor.  If you want performance over originality its a much better PS Pump.

https://www.cvfracing.com/Ford-289-302-or-351W-Saginaw-Steering-Bracket-p/302-psbrkt-s.htm



They also make one for the Cleveland.

https://www.cvfracing.com/Ford-351C-Power-Steering-Bracket-p/351c-psbrkt.htm

 

[vikingsandpintos]

Now THOSE are sexy!!

 

[73pony]

I run a complete cvf bracket and pulley kit on my cleveland. Very nice stuff.