- Joined
- May 31, 2020
- Messages
- 259
- Reaction score
- 138
- Location
- Alberta, Canada
- My Car
- 1972 Mach 1
351C 4V - C6
Blue with Blue interior
Figured I would post on here and see if people can give some tips on dropping the trans out of the car to change some seals and swap torque convertors. Its a 72 with 351c and C6, and Im just wanting to replace the seals, change filter and fluid and then put it back in. But I will likely be doing it from under the car and sadly I dont have a lift. I do have ramps so I was planning on seeing how high I can get it that way, then go from there.