Parts For Sale Quarter window kit/conversion, engine brackets, trans crossmembers, grille, conv interior quarter panels, lock rods, and more

[cwalker509]

Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325 (Sold)
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100(Sold)
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400 (Sold)
71-2 Mustang LH fender, some dents but NO rust thru, $150 (Sold)
71-2 Mustang RH fender, some dents and NO rust thru, $150 (Sold)
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150 (Sold)
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70 (Sold)
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50 (sold)
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75 (sold)
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400 (Sold)
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20 (Sold)
71-2 Mustang RH quarter extension, needs work, $20 (Sold)
71-3 Mustang evap canister bracket, $25 (Sold)
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75 (sold)
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100 (sold)

 

[cwalker509]

Some more pics.

 

[Mac]

Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400
71-2 Mustang LH fender, some dents but NO rust thru, $150
71-2 Mustang RH fender, some dents and NO rust thru, $150
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20
71-2 Mustang RH quarter extension, needs work, $20
71-3 Mustang evap canister bracket, $25
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100

Interested in radiator top seal. Did not see pic, could you provide one please. Also shipping to 44406.

Thanks!
Mac

 

[James Bond]

Hello, I'm interested in;
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
351C accelerator cable bracket (on intake manifold) $50

Do you have pictures of the lock rod and acc. cable bracket?
Is the only difference on 71/72 to 73 trany bracket the hole between the rubber mount holes?

Thanks,
James

 

[cwalker509]

Interested in radiator top seal. Did not see pic, could you provide one please. Also shipping to 44406.

Thanks!
Mac

It needs more cleaning and clips are rusty. I can try bead blasting the clips? Would do so with them on the seal.

 

[cwalker509]

Hello, I'm interested in;
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
351C accelerator cable bracket (on intake manifold) $50

Do you have pictures of the lock rod and acc. cable bracket?
Is the only difference on 71/72 to 73 trany bracket the hole between the rubber mount holes?

Thanks,
James

Pics enclosed. the 73 tranny bracket has the additional hole and is also reinforced via a second plate for all 3 of the holes. I have a 429 correct one but keeping it. I can send you side by side pics if you would like?

 

[cwalker509]

Interested in radiator top seal. Did not see pic, could you provide one please. Also shipping to 44406.

Thanks!
Mac

Looks like shipping would be about $9

 

[James Bond]

I would like to purchase these items from you.

71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
351C accelerator cable bracket (on intake manifold) $50

Zip is 97016
Do you take Paypal?

 

[cwalker509]

I would like to purchase these items from you.

71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
351C accelerator cable bracket (on intake manifold) $50

Zip is 97016
Do you take Paypal?

Paypal, venmo, zelle, snail mail, etc. Cheapest shipping is USPS at $12. [email protected], Chris Walker, 636-373-1872

 

[tommax3]

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
still available?
can I use my current glass?
shipping to 48348?

 

[cwalker509]

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
still available?
can I use my current glass?
shipping to 48348?

If you have a Mach 1 or sportsroof you have to use your glass. The coupe and convertible are the same. The fastbacks are different. I don't mind keeping the glass as a spare set and also safer to ship sans glass

 

[dsimpg1]

Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400
71-2 Mustang LH fender, some dents but NO rust thru, $150
71-2 Mustang RH fender, some dents and NO rust thru, $150
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20
71-2 Mustang RH quarter extension, needs work, $20
71-3 Mustang evap canister bracket, $25
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100

I have a question that you may or may not be able to answer. I have a 1972 351 Cleveland motor and I cannot read the numbers on the harmonic balancer, but I can clearly see the notches and know where TDC is so that's not a problem. My question is do you know how many degrees each short line represents? I'm suspecting that the short ones are either one or two degrees. Any idea how many degrees each mark represents? Thanks, in advance, for any help you can provide on this.

 

[Big Red Mach 1]

I have a question that you may or may not be able to answer. I have a 1972 351 Cleveland motor and I cannot read the numbers on the harmonic balancer, but I can clearly see the notches and know where TDC is so that's not a problem. My question is do you know how many degrees each short line represents? I'm suspecting that the short ones are either one or two degrees. Any idea how many degrees each mark represents? Thanks, in advance, for any help you can provide on this.

This is not the place to post this. Start a new post. Don't add a question like this onto the end of a parts listing.

 

[Sheriff41]

I have a question that you may or may not be able to answer. I have a 1972 351 Cleveland motor and I cannot read the numbers on the harmonic balancer, but I can clearly see the notches and know where TDC is so that's not a problem. My question is do you know how many degrees each short line represents? I'm suspecting that the short ones are either one or two degrees. Any idea how many degrees each mark represents? Thanks, in advance, for any help you can provide on this.

Sent you a PM

 

[Robbydukes]

Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400
71-2 Mustang LH fender, some dents but NO rust thru, $150
71-2 Mustang RH fender, some dents and NO rust thru, $150
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50 (pending)
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75 (pending)
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20
71-2 Mustang RH quarter extension, needs work, $20
71-3 Mustang evap canister bracket, $25
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100 (pending)

Hi, I'm Rob from Surrey BC, I have a 71 HT, looking through your list, was wondering if you had the center bracket for a mach 1 grill, I swapped out the stock grille not realizing that the M1 grille requires an extra bracket, thanks for your time, have a great day

 

[cwalker509]

Hi, I'm Rob from Surrey BC, I have a 71 HT, looking through your list, was wondering if you had the center bracket for a mach 1 grill, I swapped out the stock grille not realizing that the M1 grille requires an extra bracket, thanks for your time, have a great day

Not for sale and the early ones are rather difficult to find. Do you have two vertical hood latch supports or just one? Same car in attached pics. The light gray (now repainted to dark gray) vertical supports were used for I think most of 71. Ford switched to the single vertical support later in 71 model year. I paid $50 for a single one of the dual ones. I think I paid $75 each for a couple more to have spares. Gilbert Davenport in Edwardsville, IL may have some. I bought the pair from him. Just make sure you get the right part before dropping money on a part you don't need (or like me, buy it then find you already had it the day before the just purchased one is delivered)

 

[Mac]

It needs more cleaning and clips are rusty. I can try bead blasting the clips? Would do so with them on the seal.

Thanks for the pic. I will pass on the seal.

Mac

 

[429mach1]

Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400
71-2 Mustang LH fender, some dents but NO rust thru, $150
71-2 Mustang RH fender, some dents and NO rust thru, $150
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50 (pending)
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75 (pending)
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20
71-2 Mustang RH quarter extension, needs work, $20
71-3 Mustang evap canister bracket, $25
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100 (pending)

I sent a PM, thanks for any help you can provide!

 

[429mach1]

Sorry for the delay in contact after receiving the transmission mount bracket, I just now opened the box, everything looks great...thanks for helping me with my car!

Jim