Rear sway bar size

[73' mach 1]

I have a factory sway bar and I measure it at 1/2". I'm trying to replace all the bushings for it but summit and jegs can't find the bushings in that size. What am I missing?

 

[clevelandcoupe]

I bought the 3/4" size and wrapped the sway bar with some scrap rubber strapping until the bushing fit and installed.

Thanks, Jay

 

[73' mach 1]

I bought the 3/4" size and wrapped the sway bar with some scrap rubber strapping until the bushing fit and installed.

Thanks, Jay

Which brand bar did you buy?

 

[BeerDontCount]

I replaced that size last year. They are out there. I'll see if I can find what vendor I used.

 

[BeerDontCount]

Not sure if this is the one I used or not, but a link to one example.

https://www.energysuspensionparts.com/9.5102

Scott

 

[73' mach 1]

Not sure if this is the one I used or not, but  a link to one example.

https://www.energysuspensionparts.com/9.5102

Scott

Perfect. Thanks

 

[Hemikiller]

You need to use the brackets that come with the bushings. The factory bushings are much taller.