- Joined
- Sep 12, 2015
- Messages
- 7,889
- Reaction score
- 3,004
- Location
- SW Ontario
- My Car
- 1971 Mustang Mach 1, M code, 4 speed.
A question for the driveline guru's.
When I got my 351M code 4 speed in 08, I was told that the clutch had been replaced. However it slipped on heavy acceleration, so I changed it for a Ceterforce II which was extremely heavy until I modded the peddle shaft bearings
So the question is; can anybody identify the brand I have? The clutch is not worn and saleable for maybe a 2V engine, not a 4V.
The only marking on it are LCO 465 & 1E 18 05:22 plus what appears to be a date code. It does have USA on it as well. It is an 11"- 10 spline and is unpainted.
Get your thinking caps on guys!
Geoff.
When I got my 351M code 4 speed in 08, I was told that the clutch had been replaced. However it slipped on heavy acceleration, so I changed it for a Ceterforce II which was extremely heavy until I modded the peddle shaft bearings
So the question is; can anybody identify the brand I have? The clutch is not worn and saleable for maybe a 2V engine, not a 4V.
The only marking on it are LCO 465 & 1E 18 05:22 plus what appears to be a date code. It does have USA on it as well. It is an 11"- 10 spline and is unpainted.
Get your thinking caps on guys!
Geoff.
Last edited by a moderator: