- Joined
- Feb 14, 2016
- Messages
- 524
- Reaction score
- 2
- Location
- Clover
- My Car
- 72 Mach 1, Q code 351CJ, 4 speed.
They look like 1970 "D0AE-N" CC heads. Between the springs on the top side, you'll see the date code. take a pic of that and post it.
I didn't get a chance to get back out in the garage and look at the date code last night. I will do it this evening and post a pic. ::thumb::
Yes and yes.are these the intake and head gaskets that I need?
Intake - FEL-PRO MS96012
https://www.rockauto.com/en/moreinfo.php?pk=125729&cc=1132692&jsn=10527
Head gasket kit - FEL-PRO FS8347PT
https://www.rockauto.com/en/moreinfo.php?pk=123872&cc=1132692&jsn=18
Thanks!Those are dished with a single relief. Clean the top of one off to see if there is a stamp. If they are oversize, there should be. If not, you might still have the original shortblock in there. The 351C went to dished pistons in '73 and since your car is such a late build '72, it might have gotten them. Check the back of the driver's side of the block as Stanglover noted for the VIN stamping.
Yes and yes.are these the intake and head gaskets that I need?
Intake - FEL-PRO MS96012
https://www.rockauto.com/en/moreinfo.php?pk=125729&cc=1132692&jsn=10527
Head gasket kit - FEL-PRO FS8347PT
https://www.rockauto.com/en/moreinfo.php?pk=123872&cc=1132692&jsn=18
Enter your email address to join: