- Joined
- Feb 23, 2011
- Messages
- 514
- Reaction score
- 2
- Location
- Santee, SC
- My Car
- 72 Mach I Q code
61 Impala
67 Chevelle
78 Bradley GT II
I bought a complete exhaust system from a Pony Parts place, The muffler hangers are universal, no bracket to the frame, just the rubber, there are no brackets on the mufflers to fasten them to, 2 doughnut gaskets that are not needed and they shorted me 2 clamps.
When I called, I was transferred to tech support to leave a message, I did, it was never returned.
On the plus side, the pipes were bent correct, but the tail pipes are too short to exit the rear valance. The part number is EXK3F and they were $299.00
If I wanted something that didn't look factory, I would have went to Midas Muffler.
When I called, I was transferred to tech support to leave a message, I did, it was never returned.
On the plus side, the pipes were bent correct, but the tail pipes are too short to exit the rear valance. The part number is EXK3F and they were $299.00
If I wanted something that didn't look factory, I would have went to Midas Muffler.