Jump to content

hazard light problem


Recommended Posts

I'm confused, you say the flasher cycles, but then you say it has solid power out. The OEM flasher requires the load from the bulbs to cycle, newer solid state ones do not require the bulb load.

If the power out of the OEM flasher is solid (on all the time), then the problem is either the flasher switch or the turn signal switch. To test the turn signal switch, have someone step on the brakes with the turn signal switch off, then right, then left. To test the hazard flasher switch place it in the on position and have someone step on the brakes, if the from turn signals come on with the brake lights the hazard switch is functioning, unless it's the turn signal switch not working. The brake lights and hazard lights pass through the turn signal switch. The other possibility is the connector to the upper steering column is not connected.

 

 

“If you can't explain it simply, you don't understand it well enough.”

--Albert Einstein

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...