Steering Column Exploded View

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jan 1, 2012
Messages
8,505
Reaction score
1,376
Location
Eugene, OR
My Car
1971 Mustang Sportroof M code
I finally finished something I started some time ago, in response to recent posts and questions about what, where and how components of the steering column are.

I wasn't able to find the description/sizes of some of the hardware, and if I can come up with them I'll add them later.

Fixed Column View.jpg

Tilt Column View.jpg

 
Last edited by a moderator:
Good work Don. 

In the Ford 71 manual, it is a bit annoying that they show the fixed columns for several vehicle models and merely state " tilt similar", If the coupler connection is so different, that area, at least, ought to be shown, but it's not. The best example I could see is for the Lincoln Continental, but the diagram is so small, it's hard to make out. This one appears to be a bolt on coupler for the fixed column, i.e. not attached to the welded on plate as on a mustang and again states "tilt similar". So I wonder if the coupler for a Lincoln Continental is the same needed for the Mustang with tilt? Hmmm!

EDIT: A search on RockAuto for the 71-73 Lincoln Continental only shows 1 coupler, a Lares 202 with 3/4" full round 36 spline and has two pins (or posts) that would engage in a plate similar to the Mustang fixed column. It does not show any other details. So I guess that idea was a bust, sorry.

 
Last edited by a moderator:
Check the AMK website for fastener specs.   You can search by Ford part number.
Thanks, Mike, they had one screw. I believe most of what's missing are things like pins and spacers.

2 screws and a washer, just missing one item now. As soon as I figure it out I'll repost.

 
Last edited by a moderator:
Back
Top