351c earlies cast date.

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 17, 2020
Messages
16
Reaction score
2
Location
Denmark
My Car
73 conv.Q kode.
67 Galaxie 500 conv. 390 C6
69 Coupe 390 4 speed
What is the first known casting date for 351c?
Just opened this engine...
 

Attachments

  • 20241027_150058.jpg
    20241027_150058.jpg
    4 MB
H is August right?

I would have to guess that the foundry would have started casting blocks and heads in May or June in order for the pipeline to be full of engines to support building cars mid-July.
 
H is August right?

I would have to guess that the foundry would have started casting blocks and heads in May or June in order for the pipeline to be full of engines to support building cars mid-July.
Just what I thought..but any record of the early casting dates...
 
Correct, H = Aug so that block was cast on Aug 19 1969. The papers I have show D0AE-A, C,E,G,J,L all with two rear drain holes ( see pic of a J block I had) All these were designated as 1970 blocks, but cast earlier. Those same casting designations also show up for 1971, with the exception of J, so the date code is the deciding factor. 71 blocks had the drain hole crudely cast in the front of the valley and the rear holes removed.
So there may have been blocks cast way before your Aug block.
 

Attachments

  • IMG_0352_LI.jpg
    IMG_0352_LI.jpg
    1.2 MB
Last edited:
Correct, H = Aug so that block was cast on Aug 19 1969. The papers I have show D0AE-A, C,E,G,J,L all with two rear drain holes ( see pic of a J code I had) All these were designated as 1970 blocks, but cast earlier. Those same casting designations also show up for 1971, with the exception of J, so the date code is the deciding factor. 71 blocks had the drain hole crudely cast in the front of the valley and the rear holes removed.
So there may have been blocks cast way before your Aug block.
Great info, but this is still an early casting, right. Have several blocks 2 and 4 boltet, but this is the "oldest" Cleveland I have seen. Thanks for information.
 
Great info, but this is still an early casting, right. Have several blocks 2 and 4 boltet, but this is the "oldest" Cleveland I have seen. Thanks for information.
I don't know for sure, just a guess, but A through G could have been early development (prototype) blocks. J is the earliest I've seen too. Some other members will have far more knowledge on this.
 
Probably a question Kevin Marti could answer if he can find the first 70 Mustang serial# with a 351C. Figure the block build date would be around 20-30 days before that...

Is there a readable vin stamping on yours?
 
A mid-August block would likely have ended up in an early September build car. It's an early block, but there were likely many, many thousands cast and built before it. Vehicle production started in late July, and there were three plants building Mustangs. The 351C also went into Torinos, Montegos and Cougars in 1970.
 
Probably a question Kevin Marti could answer if he can find the first 70 Mustang serial# with a 351C. Figure the block build date would be around 20-30 days before that...

Is there a readable vin stamping on yours?
Lookede for a vin or parts of it..but non found.
 

Latest posts

Back
Top