Search results

I have to replace the motor mounts and I have a canton high capacity oil pan to swap in too. Can I do either or both of these without removing the engine? Can I just lift it with a hoist and get enough clearance? I did a search but motor mounts are a big topic on the forum so I wasn't able...

The old girl rolled off the line 50 years ago today. To celebrate I drove her around some. I am thinking I might take her to her first car show sometime soon too.

I've used these on my headers and they work great so I decided to give them a try on my valve covers. I replaced the gaskets and cleaned them up and then installed these 'stage 8' locking valve cover bolts. https://www.stage8.com/product/8960b-valve-cover-bolt-kit-16-bolts/ Basically you...

My emblems rattle and I need new barrel clips. I found some Scott Drakes .12 inch that are advertised to work on 65 to 73 Mustang emblems. Has anyone tried these or can confirm the correct size? Thanks!

It guess it was in South East Orlando Florida.  https://www.youtube.com/watch?v=Kw2s3gbPopo&t=103s It's part of a montage of videos but I believe it will start at the Mustang losing its rear wheel.   Ouch!

Howdy all!   I use unique passwords for every site I log into.  I just received an email that included an old CJ's Pony Parts password.   It's the usual one where they threaten to send pictures of me 'pleasuring myself' while watching porn.   lollerz I confirmed the password was not valid by...

What have you had success with?  351C.  I have tried the clip on ones but they tend to twist a bit.  I see severall different 'clamp' down versions.  Even some using aluminum, which to me would defeat the purpose.

Anyone in the Phoenix area want to do a meet and greet?  Maybe at a resturaunt or a park or perhaps at one of the local weekly car shows like the Pavillions?  The weather is getting nice so we should try to get together? There is a resturaunt called Portillo's it has an old school theme to it...

So how much rake do you have? I put a level on the passenger rocker, right at the 'Ford'. Rear of the car is to the left. Take a picture of yours and let's all compare.

EDIT: I originally typo'd the part number. I had written kg4505 and should have written kg4504. I have corrected it in this original post. I purchased a set of kyb front shocks. Part number kg4504. I noticed they were shorter than my existing kyb shocks part number 343156. With the tires...

I went to the NASCAR race today. There was a small car show inside the event. I was surprised to see a 73 convertible mustang. It was the ONLY mustang represented. There were about 2 dozen cars total. A 61 custom Lincoln drop top. Some rat rods. A few 'ricers'. Among the small group was...

My engine specs are in my sig. I run a mallory unilite now. It works okay but the springs to adjust the timing curve are no longer available and sometimes it acts up a bit. I am limited to small cap distributors because of my carb setup. No FI or Computer controls on the car. Vacuum advance...

I am looking at pulling the engine. I have 4v hooker comps. I am going to leave the tranny in the car. Has anyone tried pulling the engine with the headers attached? I haven't crawed under it to see what I am up against. Historically I had the super comp headers and I didn't see a way of...

I want to recurve my distributor. It's a unilite and would use this kit: http://www.autozone.com/1/products/2...ory-29014.html I am probably going two stage with purple plus orange, pink or grey. My setup already has the purple. I could pay ya for the springs and shipping. I don't need the...

My Master Cyl was leaking so I knew I was going to have to bleed the brakes. I picked up some of the Russell speed bleeders. I bought them on amazon. I am very happy with how they work. Not only was it much easier to bleed the brakes I can't remember ever having such a tight pedal before...

Has anyone tried to add some type of chain or something to keep their Cleveland from torquing in the engine bay? Perhaps I have broken a motor mount. But if that is the case it just means if I replace it I will break the next one too. I known when I really get on it my engine is rotating. I...

I put in a new fuel level sender. It took me longer than it should have. I thought I had less gas in the tank than I did but, since my old sender wasn't working, I guessed wrong. Anyways. I get the new sender in and fired the car up. Idles fine. I add the gas I took out (about 3 gallons)...

http://phoenix.craigslist.org/evl/cto/5335244457.html I don't normally post up craigslist but I saw this one and it seems like a decent deal. Claims no rust. The door panels look good. Power windows is a nice option. 'Engine makes noise'. Looks like it needs a top, a fresh paint job and...

I have a generic Mustang Calendar. Lots of different years (all 73 or older). A previous month had a 71 mustang. I never look ahead so I was happy to see I will be looking at this for the month:

So the thread on old tires got me thinking I should look at replacing mine. But I have 14" rims and they are pretty old and I want to get new rims and tires. Maybe 17" or 18" so I can fit in disc in the back and bigger disc up front. But if I am going to upgrade my brakes I need to make sure...