- Joined
- Feb 11, 2014
- Messages
- 37
- Reaction score
- 0
- Location
- La Habra Heights, CA
- My Car
- 72 Mach 1
79 Ranchero
79 Corvette
OK here we go. I'm starting the rebuild of a 72 Mach 1. It now has a 351C-2v with an FMX trans and just today I found a rebuilt 1970 351C-4v with a C6. The engine has less than 20k on a stock rebuild. I bought them today and have now abandoned my idea to rebuild my 2v with a stroker kit and simply use the stock new one. I will upgrade the intake to an Edelbrock performer and I'm not sure what CFM carb I should add. I didn't have my camera with me or would have included pics of the new engine.
I've already purchased a few interior items from Don at OMS and a few exterior items (front spoiler, stripe kits) but what I really need to do next is work on the brakes. It now has manual drums front and rear and I at least want to put discs on the front and probably on the rear too. Any advice or tips are very welcome.
Here are the pics of the car I'm starting with.
I've already purchased a few interior items from Don at OMS and a few exterior items (front spoiler, stripe kits) but what I really need to do next is work on the brakes. It now has manual drums front and rear and I at least want to put discs on the front and probably on the rear too. Any advice or tips are very welcome.
Here are the pics of the car I'm starting with.
Last edited by a moderator: