Console assembly question

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 21, 2018
Messages
77
Reaction score
7
Location
US
My Car
1973 Mach1, Q code, 4 speed, with an open 3:25 differential. It has what is left of the original Gold Glow paint and a very sun baked ginger interior. I purchased it in Winslow Arizona in May 2018. It has a 75 DSO and I believe it spent its entire time in AZ. It appears to have been parked in 1978 until earlier this year when the guy I bought it from purchased it.
My car originally had the small console but it was missing when I bought the car.  I’m trying to get all the pieces to put one back in but not sure what all I need and how it assembles.  I have the rubber boot that bolts to the trans tunnel, the console ashtray, and the black filler piece.  Is there more to this as I don’t see how to attach the filler panel to the console?

DA352D39-1386-491E-A466-2013EB774A32.jpeg

2CE09297-2232-4284-B638-349750DB42C9.jpeg

B4218096-1017-414E-8B2E-8419FF4C47EC.jpeg

 
Thanks.  Who sells that part, I can't find a new replacement?

 
I too have the mini console in my 4 speed. I have a spare, but missing the insert. If you can't find one, make your own. Amazon sells black plastic sheet 1'x1' in varying thicknesses and types, I think 1/8"ABS would be good. I went one step further and added a piece 3/8" thick to take up more space and bring the top insert closer to the console. There was a large gap under mine that looked ugly!

Hope that offers a solution.

EDIT; NPD have it, #7E391-1A, list as 4 speed, 

 
Last edited by a moderator:
Back
Top