Danish Mustang “Pro-Touring" project - Creator 526

[protouringstang73]

New sheetmetal welded in on the inside of the wheelsbase before it meets the trunkfloor which also are ready to be installed now after the test fitting

 

[protouringstang73]

I also got the engine up in the engine stand today, I did'nt thrust the stand enought so I made some more supports for it and made a stronger plate where it attaches to in the back! Now I have to decide what color I should paint it : Damn I cant stop looking at it

 

[OzCoupe72]

Looking good and like what you've done with the engine stand. Be good to see what colour you go with.

If my welding was as good as yours I would post photos before I clean them up, hopefully will improve

 

[protouringstang73]

Looking good and like what you've done with the engine stand. Be good to see what colour you go with.

If my welding was as good as yours I would post photos before I clean them up, hopefully will improve

Thanks! But I will have to say that it's allways easier to weld in thicker metal than sheetmetal, the thick metal can you work a lot more with! I also learn as I go, so just go for it

 

[protouringstang73]

Making the underside of the rear quarters smooth and clean! I think it's gonna look great?! I'm not finished yet as you can see

 

[protouringstang73]

And this is how it looks like when it's finished, I still need to make some final finish to it, but I will take that with the rest of the car

 

[protouringstang73]

And the same for the other side

 

[Ray]

It's a beautiful thing. Badda build badda boom . You go Daniel.

 

[Wide-body71]

Looking great buddy. Glad your moving on it.

 

[DK73]

Looking great [emoji41][emoji106][emoji106][emoji1362]

Sendt fra min F8331 med Tapatalk

 

[protouringstang73]

Thanks a lot guys! Yes that's really nice!

 

[Finmach]

I'll bet that the new engine is making Daniel to work harder!!! Should be nice ride when done, I mean the enginebuilder is knows his stuff when it comes to SBF windsors. Nice fabricating Daniel with the lower sheet metals - looks good.

 

[protouringstang73]

Hi Guys

You might have noticed that I have been away from the site for a while, but I’m back again now! I have had some personal issues that I have been working with but I’m on the right track again and ready to do some serious work on the Mustang now! While working with my problems I had to sell the engine to get some money, so I dont have that anymore, but a new dream is to install a 5.0 coyote engine with a 6 speed tranny, lets see how it goes 

Today I installed the safety loop and began to install the trunkfloor, after that I will continue to clean the underside for holes and other things there should’nt be there anymore 

 

[keiths71]

Wow. Impressive looking forward to seeing it together!

 

[mach71351c]

Welcome back.

 

[DerAlte]

Looking good already, nice work!

 

[protouringstang73]

Today I got some paint on the 9” rearend and all the suspension parts. I went with a charcoal metallic witch I think will look under the car 

 

[timachone]

That looks nice and clean, yummy ::thumb::

 

[protouringstang73]

Got the 9” assembled with the 14” Baer rotors and 6 pistons calipers, I really like it, what a piece of art  :whistling: 

 

[Studdley]

That thing is going to be mean, can't wait to see her come together