mikepasquale1
Well-known member
Ok i went to mess with the issue today from my previous post and heres what i found out. The 9AMP fuse i told you was blowing out is actually supposed to be a 14A. I replaced it with a 14A fuse and...pop!
I checked the accessory post that the cd player is hooked to. I have power. I also checked the fuse in the back of the CD player, its fine.
Here is my theory.
I keep blowing a fuse that is on a seperate circuit
When i loosened the accessory post i told you it became loose to the point that you can push it up into the fuse panel. The other side of the post looks like the top of a rivet or a nail head. What i think may be happening and i havent pulled the fuse panel out yet to check, but when i loosened that post and it became loose and i pushed it up i think i may have grabbed a wire with the edge of the post and when i tightened the post back down. i may have tore into a wire that is going to the back of the fuse panel, causing it to back feed and blow that fuse. Its a strange theory, i work in forensics for a living so this is how i think. Take a look at the pictures i found of a fuse panel and notice the locations of the wires and let me know if you think my theory is plausable. Ill laugh if im right.
I checked the accessory post that the cd player is hooked to. I have power. I also checked the fuse in the back of the CD player, its fine.
Here is my theory.
I keep blowing a fuse that is on a seperate circuit
When i loosened the accessory post i told you it became loose to the point that you can push it up into the fuse panel. The other side of the post looks like the top of a rivet or a nail head. What i think may be happening and i havent pulled the fuse panel out yet to check, but when i loosened that post and it became loose and i pushed it up i think i may have grabbed a wire with the edge of the post and when i tightened the post back down. i may have tore into a wire that is going to the back of the fuse panel, causing it to back feed and blow that fuse. Its a strange theory, i work in forensics for a living so this is how i think. Take a look at the pictures i found of a fuse panel and notice the locations of the wires and let me know if you think my theory is plausable. Ill laugh if im right.
Last edited by a moderator: