Fuel Line

[not2old]

I keep crimping the steel fuel line tring for some tight bents. I don't like it but is plain rubber fuel line safe along the manifold like from the dist. to the carb. I my look for a breaded cover for protection.. Any Ideas????

Alan L

 

[droptop73]

Rubber in lengths shorter than 6" or so is fine. I read an article recently that recommended using "high pressure" hose as it is more resistant to todays fuels.

 

[Tnfastbk]

I ran a metal line up from the fuel pump. Are you using tubing benders?

 

[not2old]

Broke one tube bender, then used spring bender. Should by new bender :dodgy: