Headers for 351C

[Milalynne]

Im looking at headers for my car. I am wondering what size would I need to get 1' 3/4 etc? I do not want to buy the wrong ones and have to ship them back. I know most of you have more experience than I do. I bought headers for the corvette I built and my 5.0 but it was straight forward with those two cars.

 

[will e]

Assuming a 351C? There are lots that fit the car but may not fit your intentions. What are you looking to do with the car and engine? That will help folks provide more specific recommendations.

 

[73inNH]

http://www.fordpowertrain.com/fpaindex/Mustang1.htm

I can confirm those bolt on a 73 vert, a/c, p/s, 4 speed, 351C 4V.

 

[Milalynne]

Well, It's a little modified, it has been rebuilt with top pistons, it has the Holley Brawler BR7302-1 2370 carburetor. Trick Flow aluminum heads ( I don't have the model number yet). Edelbrock RPM Airgap intake. MSD ignition, looks like stock exhaust manifolds. I am anting to get the headers and then ill have an H pipe built as I have done before at an exhaust shop I use. I don't know what mufflers it has. Keep in mind I just got in a couple of months ago and with my work schedule i have not had time to bring it from Dallas to Tulsa Oklahoma where my family's farm and large shop we build our personal cars in. I took these few months to purchase all new Ginger interior, I bought a 1 in front sway bar, .5 inch rear sway bar, Qa1 set of adjustable shocks, new bearing kit. as I am going to do road racing for fun. That is all the info I have and any guiding on the headers would be much appreciated.

 

[Hemikiller]

Hooker Competition 6915 for the 4 barrel heads

 

[Milalynne]

Hooker Competition 6915 for the 4 barrel heads

Hooker Long Tube Headers 1-3/4" Competition Ceramic Coated 4-Barrel 351C 1971-1973​

Hooker:
6915-1HKR These are %730

Or what if I got these a guy is selling online and had them ceramic dipped. I could get them for 200 "Came off of a 351 Cobra Jet with Factory 4 Barrel with Big Heads, and Big 2" Ports. From A 1972 Ford Mustang Mach 1 Ports are 2" tall, Primary pipes are 1.75" Down to 3" collectors In Dalton Ga"

Well even if I got these for 200 and paid 299 to dip that would be 400, i would save 300 dollars but they dont look to be the best of shape but I do like how they are original. If you go off the guys word.

 

[will e]

What does he mean 'original'?

 

[Hemikiller]

The painted Hooker 6915 headers are $300-ish on Summit.

https://www.summitracing.com/parts/hok-6915hkr

 

[73pony]

Need to know what trick-flow heads you have. I believe most of them have the 2v ports that are raised .10