mikepasquale1
Well-known member
I watched a video on youtube where holly shows how to adjust the kickdown rod for their carburetors. they say make sure you pull the kickdown rod all the way back and then adjust the screw until the throttle butterfly touches the adjusting screw on the kick down rod. weather I turn the screw IN as far as it will go or as far OUT it will go, i still achive the same goal as the video tells me. should kick down be activated early or late? I'm not sure where to set the adjustment for the screw.
how does kickdown work?
should it happe at early throttle or later throttle?
I have a 351w with FMX and holley carb. yes all of the required attachments and extensions are in place to allow the kick down to work properly. I just need to know how to adjust it, or more importantly where to set the adjustment screw.
Like i said whether the adjustment screw is turned in all the way or turned out all the way, the tab on the accelerator feed on the carb still activtes the kickdown, I just need to know where to set that's screw and when the kick down should be activated.
any help is appreciated .
how does kickdown work?
should it happe at early throttle or later throttle?
I have a 351w with FMX and holley carb. yes all of the required attachments and extensions are in place to allow the kick down to work properly. I just need to know how to adjust it, or more importantly where to set the adjustment screw.
Like i said whether the adjustment screw is turned in all the way or turned out all the way, the tab on the accelerator feed on the carb still activtes the kickdown, I just need to know where to set that's screw and when the kick down should be activated.
any help is appreciated .