Looking for all three vents like this for a '71 with A/C. The two side and centre vents in really nice shape. I would like to get them with the housings intact and if possible the front dash pieces that they sit in (this may only apply to the side vents, cant recall the centre vent set up at this time).
I also need the small circular "seat belt" light housing that slides into this hole and you then slide in the light bulb. The chrome must be really nice and not flaking.
I still need an underbody convertible structural plate that covers the driveshaft behind the transmission, if someone has a nice one that is not beat up (crud and surface rust no problem as I will blast it anyway), let me know.
As I move into the restoration of the interior on this car, the real fun is just beginning... Cheers.
Funny thing too is where your seat belt light goes you have a hole with 2 notches there whereas mine is just round, no notches. BUT, on my dash the hole where the convertible top switch goes has the 2 notches. Weird or reversed or what? By the way, my dash was not hacked by me!
Hmmm, hard to tell from your picture, but I am pretty sure that the convertible top switch was always located on the outside of the dash, nearest the door... Not sure what you mean by notches, pretty round hole in general. I just put my old "belt" light switch in for the time being...
[/quote
If you look at the outer left hole you can see 2 notches and the seat belt light has 2 tabs so I wondered if that would hold it securely in the round hole. The hole next to the right (where my top switch is at) doesn't have those notches, it's just round. So I figured it could be backwards, I just don't know. Every dash I have seen so far has the switch on the left and the seat belt light next to it on the right.
