- Joined
- Dec 24, 2010
- Messages
- 2,888
- Reaction score
- 45
- Location
- U.S.A.
- My Car
- 1972 Q code Mach 4spd
2004 350z
2005 Corvette
1971 Camaro SS/RS
Guy's if possible I need a few measurements inside the passenger door jamb to quarter panel body lines..A few different cars would be great. I had made a comment on a post that don't be afraid to some times cut out or redo previous work..well here's an example. When I had my friend here helping us on the rear of the car in his rush to get the right side quarter welded he never put the rubber bumpers on the door to check the fit of the door to the quarter..(this is why you use sheet metal screws first on a panel BEFORE you weld it & I asked him 3 times you sure it fits?) Guess it's my fault for not checking..So without the bumpers he lined up the door & the quarter & now with the rubber bumpers the quarter sits in a good 1/4" (He's a body guy with 20 years expirence?) I have the welds drilled out & know where the quarter needs to go..Just be nice to have a few measurements too. Just measure as per the pics it's the body lines from the door jamb to the quarter edge..Would be a good thing to wiki for anyone replacing a quarter...Thanks!