question for you electronic gurus

[Tamnative]

I have looked all over the web for a specific type of relay and all I get is confused.
What I want to do is make the seat belt light turn on for 10 seconds + -when I turn the ignition on then go off.
I have connected 2 wires from the seat belt circuit and placed them in the engine compartment, one is hot with the key on and the other is the ground.
I want to use the hot wire for the trigger and have the ground switched so when I go to start the car the belt light will be energized for about 10 seconds then go off.
I don't have any of the other belt circuits to worry about as they were removed by the PO. I'm just looking for a standard 3,4 or 5 pin relay but don't know the terminology and I would like to keep it simple and cheap
Thanks for any help

 

[Sheriff41]

You might check @TheRktmn (Rocketman's) site: https://www.rccinnovations.com/index.php

 

[Tamnative]

You might check @TheRktmn (Rocketman's) site: https://www.rccinnovations.com/index.php

I have checked him out and they aren’t available.

 

[71fast]

You could use this relay.

https://www.amazon.com/Time-Delay-Relay-seconds-SPDT/dp/B0744HSF8P

 

[will e]

The one you posted is "10 second delay before switching On". He wants it on for 10 second and then have it turn off.

 

[NG8264723]

This should work!
https://www.ebay.com/sch/i.html?_ss...tronics&_oac=1&_trksid=p4429486.m3561.l161211

 

[Tamnative]

The one you posted is "10 second delay before switching On". He wants it on for 10 second and then have it turn off.

 

[Tamnative]

You could use this relay.

https://www.amazon.com/Time-Delay-Relay-seconds-SPDT/dp/B0744HSF8P

That is the style of relay I’m looking for but I want it to turn off after 10 seconds.

 

[basstrix]

Maybe this one?

https://www.ebay.com/itm/166251172261?itmmeta=01HQ984FKSX89CC4KCWX0NM4DJ&hash=item26b55791a5:g:kzYAAOSwUklkwz9w&itmprp=enc:AQAIAAAA4PJRtfDvkZKzCSrO4BHEVR0Mpn/74V5zgsqedHZpsyXo14LMhq0LFtVDv0uiulb7A2Udvb8TMxwgvxT4+rcLQp9cYB8Z5v1Z5jq8E7tHNrOI/eLf/Tv/jp7WI1PnMc9DECN0Z7ag4IV86adt1bINCWYvli5l6WEutBKPH8Z01Z6+7yaZUpo1v5AZQCg7eRJ1T4gANPhIjXWawFdZObWEbz2HqN9ur1bKQQOXT2X29rTZ0/7JFdkwSrCONGiVb4CQVcatEDf2/9Hgl62VZuwlKW4tkGV4F9CrQmUVjrSzft0T|tkp:BFBMlPqRqLpj

Edit: Or maybe this one is more applicable? Says 0-60 sec adjustable.

https://www.ebay.com/itm/2623797842...XEHjWmSBCKWM9/1OTmcOELiw==|tkp:Bk9SR_6jqKi6Yw

 

[Tamnative]

Maybe this one?

https://www.ebay.com/itm/166251172261?itmmeta=01HQ984FKSX89CC4KCWX0NM4DJ&hash=item26b55791a5:g:kzYAAOSwUklkwz9w&itmprp=enc:AQAIAAAA4PJRtfDvkZKzCSrO4BHEVR0Mpn/74V5zgsqedHZpsyXo14LMhq0LFtVDv0uiulb7A2Udvb8TMxwgvxT4+rcLQp9cYB8Z5v1Z5jq8E7tHNrOI/eLf/Tv/jp7WI1PnMc9DECN0Z7ag4IV86adt1bINCWYvli5l6WEutBKPH8Z01Z6+7yaZUpo1v5AZQCg7eRJ1T4gANPhIjXWawFdZObWEbz2HqN9ur1bKQQOXT2X29rTZ0/7JFdkwSrCONGiVb4CQVcatEDf2/9Hgl62VZuwlKW4tkGV4F9CrQmUVjrSzft0T|tkp:BFBMlPqRqLpj

Edit: Or maybe this one is more applicable? Says 0-60 sec adjustable.

https://www.ebay.com/itm/262379784221?itmmeta=01HQ98A27HCB3EB57K3H482PZQ&hash=item3d170dc81d:g:3-MAAOSwSzdXCmY7&itmprp=enc:AQAIAAAA8HB9EyVsnCp6z3dak0+55JvxFEhmI9EQVQfbHTOvt4kQSFqn2pxgzkYJlg9to/5RJ9f1gTQ4MndEIvgfMVylLDWamDZnVbOtoAWLZEYxpFYuNpkJ0RYfaK/HlIehkDXHpeTObK4049yl/AJh2MuM7AkPRc+cF8V8f4p5SkkGkAtZKxQl/U42QLjKll0IeiiyArschNYr9LNRYMi/BJ1CMd+sRJ59wfnAG+ul57DCxp7EDVDZOILCtyQ2pqYZZnKc/KjBdq5670sLTXurfBNV8JKQmf68OwFY7aS8q2s6n1XEHjWmSBCKWM9/1OTmcOELiw==|tkp:Bk9SR_6jqKi6Yw

Thanks but I already got one similar to that from China and I would like to get one that is like a normal as in a little black cube with 3,4 or 5 spade plugs on the bottom.

 

[will e]

I wonder what the factory used? I am pretty sure the light didn't stay on if the passenger didn't fasten their seat belt.

I always thought it would be fun to wire into the throttle somehow.

 

[Tamnative]

The is a switch in the seat belt retractor that opens when the belt is pulled thus turning off both the light and buzzer. All of which was disconnected in my car by the PO.

 

[73MustangCoupe]

Just kind of thinking out loud here, but you could use the 10 second delay relay to trigger a second relay wired so that it turns off the current to the light when activated.

 

[Hemikiller]

Something like this might work, triggered off the starter relay

https://www.delcity.net/store/Time-Delay-Relays/p_804415.h_804416

 

[Tamnative]

That’s what I was looking for thanks!!!