RIBS 71 convertible build JUNE 21 till??

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I am stuck waiting on the AC, so I finished the trunk and textured it so I can run the wiring bundle. I used a gray/white spatter paint over 3 coats of rustoleum, after I stripped an 1/8th inch of tar, and several layers of paint, and treated the minor rust with phosphoric acid….also had some patches welded in, and new bumper supports added. This stuff from JEGS has a nice tone and texture, and will keep the trunk light, which will help my old eyes…

also climbed under, changed speedo cable, adjusted a shift interlink, and unbundled a shift light i had rapped up last year….
 

Attachments

  • 474B1A6D-2A69-4D44-9B0D-FC936C12EEDD.jpeg
    474B1A6D-2A69-4D44-9B0D-FC936C12EEDD.jpeg
    853.7 KB · Views: 13
  • 274BF735-107C-4F7E-BA7A-9F975494595D.jpeg
    274BF735-107C-4F7E-BA7A-9F975494595D.jpeg
    1.5 MB · Views: 13
  • 505F8685-0B6E-42E6-B537-9FC7ED7516DD.jpeg
    505F8685-0B6E-42E6-B537-9FC7ED7516DD.jpeg
    1.4 MB · Views: 13
  • 51A0E48B-7232-45F2-BD9D-44B54FF6CD3C.jpeg
    51A0E48B-7232-45F2-BD9D-44B54FF6CD3C.jpeg
    3.3 MB · Views: 14
  • 9F53970E-0916-40D0-ACBE-1810795D4685.jpeg
    9F53970E-0916-40D0-ACBE-1810795D4685.jpeg
    1.3 MB · Views: 13
So I measured out the rear harness and started on it…so far so good. Needs a few more hours of termination and cleanup.
 

Attachments

  • 9CBD490D-C50B-4389-B2F4-7968BF4FB85B.jpeg
    9CBD490D-C50B-4389-B2F4-7968BF4FB85B.jpeg
    937.7 KB · Views: 15
  • 71CDEFEA-09A5-44DA-B2D5-60EF684A294B.jpeg
    71CDEFEA-09A5-44DA-B2D5-60EF684A294B.jpeg
    921.3 KB · Views: 15
I am stuck waiting on the AC, so I finished the trunk and textured it so I can run the wiring bundle. I used a gray/white spatter paint over 3 coats of rustoleum, after I stripped an 1/8th inch of tar, and several layers of paint, and treated the minor rust with phosphoric acid….also had some patches welded in, and new bumper supports added. This stuff from JEGS has a nice tone and texture, and will keep the trunk light, which will help my old eyes…

also climbed under, changed speedo cable, adjusted a shift interlink, and unbundled a shift light i had rapped up last year….
Looks great! Nice progress.
 
finally some decent progress.
still no AC to install.

but rear wiring is mostly done. Have to do fuel tank, but the body plug American Autowire sent is a little small. It will work with generous amounts of sealer but I am not ready for that….

the convertible top, rear lights are all complete up to dash connector. It’s not permanent in its routing and tie down but you get the idea. I also have one courtesy light bundle not completed.
 

Attachments

  • CB2F08DA-6C7C-42B8-AE99-C5026356A1F3.jpeg
    CB2F08DA-6C7C-42B8-AE99-C5026356A1F3.jpeg
    947.1 KB · Views: 18
  • 37416C05-F208-4D0F-AB9E-EAC0BF7B0D0A.jpeg
    37416C05-F208-4D0F-AB9E-EAC0BF7B0D0A.jpeg
    941.9 KB · Views: 19
  • C93D9493-AD12-44B9-B1BC-4317976F7AB7.jpeg
    C93D9493-AD12-44B9-B1BC-4317976F7AB7.jpeg
    1.1 MB · Views: 19
  • A007FB33-CBF9-4ED0-8C23-29890C23C58F.jpeg
    A007FB33-CBF9-4ED0-8C23-29890C23C58F.jpeg
    792 KB · Views: 18
Also building this to mount inside center console and wire up to dash….has a built in volt meter and 2 USB charger ports..still needs touch up paint….
 

Attachments

  • E3C87372-A381-4D35-AE8A-078506469B45.jpeg
    E3C87372-A381-4D35-AE8A-078506469B45.jpeg
    710.6 KB · Views: 4
  • DB078E1A-9CE8-4409-894A-266216667897.jpeg
    DB078E1A-9CE8-4409-894A-266216667897.jpeg
    708.5 KB · Views: 5
  • F1ACBFAA-AF3F-44A9-98C4-89FC6BE7CA06.jpeg
    F1ACBFAA-AF3F-44A9-98C4-89FC6BE7CA06.jpeg
    656.4 KB · Views: 5
  • 52466BE6-0EBB-4121-9E3F-2E8BB2FF3630.jpeg
    52466BE6-0EBB-4121-9E3F-2E8BB2FF3630.jpeg
    721.6 KB · Views: 5
Also built a new Map light out of an RV LED dome light kit. Will wire it in to the AAW a kit, maybe courtesy lights, maybe independent with switch. It works with a 9v battery. 😀
 

Attachments

  • B71D04F7-1918-4D45-864A-DE580102B78E.jpeg
    B71D04F7-1918-4D45-864A-DE580102B78E.jpeg
    932.9 KB · Views: 8
  • 8FE740A2-6C21-4913-9C71-1E3247EC8580.jpeg
    8FE740A2-6C21-4913-9C71-1E3247EC8580.jpeg
    773.1 KB · Views: 8
More console work, fresh paint, it’s going to sit next to blue and white seats, and white side panels…colors are looking good together!35E2FF70-FA4A-44EB-9166-0FD03E045016.jpeg
 

Attachments

  • 2399B192-F7CB-43C1-9573-E5A770EB0E31.jpeg
    2399B192-F7CB-43C1-9573-E5A770EB0E31.jpeg
    1.1 MB · Views: 10
  • AD304578-894D-4996-BD8D-7B698C11AB1A.jpeg
    AD304578-894D-4996-BD8D-7B698C11AB1A.jpeg
    969.1 KB · Views: 10
  • 4778FED5-A966-49BD-80BB-DCFDF64E2111.jpeg
    4778FED5-A966-49BD-80BB-DCFDF64E2111.jpeg
    923.2 KB · Views: 12
  • 352291FC-A4D6-4825-AF18-B6EB521D0D3B.jpeg
    352291FC-A4D6-4825-AF18-B6EB521D0D3B.jpeg
    1 MB · Views: 12
  • 7D1DB717-6036-4F1F-A8F5-9C0928A388E3.jpeg
    7D1DB717-6036-4F1F-A8F5-9C0928A388E3.jpeg
    1.1 MB · Views: 12
That looks really nice. I may end up painting (dying) the center console on one or both of our 73 Mustangs. Currently they are the original ABS black they came in, which frankly looks nice. But, in Ginger to match the rest of the interior would be nice, and just may set a nice tone to the kind of care the two Mustangs get..
 
That looks really nice. I may end up painting (dying) the center console on one or both of our 73 Mustangs. Currently they are the original ABS black they came in, which frankly looks nice. But, in Ginger to match the rest of the interior would be nice, and just may set a nice tone to the kind of care the two Mustangs get..
It’s not horribly difficult…actually easy…washed with hot soapy water and scrubbed with cloth, greeny and sponge, cleaned narrow areas with Qtips, then layed Masking tape on chrome and cut with razor blade to fit. Sprayed with SEM adhesion promoter and paint from NPD(expensive) 1 can for console. Then touched up chrome with pen from Hobby Lobby.
 
Thought I would throw out an AC update.
wasn’t ready in 8 weeks as promised.
wasn’t ready at end of the 12th week as promised.
now the promise is START production Monday.
getting tired of the story changing.
 
And an update on other progress…I have moved to door cavities, my least favorite and most dreaded task on the entire car….
been grinding with wire brush and cleaning, the drivers door is off a 73, and not so bad, the passenger door has been rebuilt once and has rust on the rebuilt part, but it’s mostly surface rust. However the top internal structure is a bit rusted out… not sure how I am gonna handle it….lost of phosphoric acid and Mastercoat sealer to come!
 

Attachments

  • FAC37D90-80A5-46EB-B6A4-53516B3BD36E.jpeg
    FAC37D90-80A5-46EB-B6A4-53516B3BD36E.jpeg
    851.4 KB · Views: 11
  • F6A58A89-DBBC-4EEA-B9E2-1D9336CE5170.jpeg
    F6A58A89-DBBC-4EEA-B9E2-1D9336CE5170.jpeg
    577 KB · Views: 11
  • A63083C8-4A41-4A40-AB3B-65B5B5714CC7.jpeg
    A63083C8-4A41-4A40-AB3B-65B5B5714CC7.jpeg
    594.8 KB · Views: 11
  • A3A05054-81D8-4E26-AE81-28AD1C545E62.jpeg
    A3A05054-81D8-4E26-AE81-28AD1C545E62.jpeg
    802.1 KB · Views: 10
  • 4A705008-322B-47D1-85DC-49B9C0B6E9AD.jpeg
    4A705008-322B-47D1-85DC-49B9C0B6E9AD.jpeg
    916.6 KB · Views: 11
  • 5CD94FCF-FE20-48FD-AA48-A15956D8B087.jpeg
    5CD94FCF-FE20-48FD-AA48-A15956D8B087.jpeg
    552.9 KB · Views: 11
More stuff, I thought the drivers door was a little better, but it’s not….a little Swiss cheese on bottom…. the doors will eventually come off and be repaired….
 

Attachments

  • 4BBF8D05-EABB-4BA1-BFCE-A3CE8A203606.jpeg
    4BBF8D05-EABB-4BA1-BFCE-A3CE8A203606.jpeg
    591.9 KB · Views: 14
  • 0B39A27E-8B78-439C-A50F-92436D856ADB.jpeg
    0B39A27E-8B78-439C-A50F-92436D856ADB.jpeg
    830.7 KB · Views: 14
  • BE51BE7D-7F86-4463-9D84-DA8FA768AEE3.jpeg
    BE51BE7D-7F86-4463-9D84-DA8FA768AEE3.jpeg
    729.4 KB · Views: 14
More stuff, I thought the drivers door was a little better, but it’s not….a little Swiss cheese on bottom…. the doors will eventually come off and be repaired….
At least the drivers door seems like an easier repair, that rust is much easier to cut out and replace with good metal. the passenger door, not so much.
 
Back
Top