- Joined
- Jul 6, 2015
- Messages
- 4,352
- Reaction score
- 210
- Location
- Iowa
- My Car
- 1973 Mustang Grande 351C 2v
Converting a 73 from FMX to T-5. If you have something you want to sell or suggestions on sources other than MDL where I can save some coin let me know! Thanks in advance. Wanting to try to get most of the parts sourced by spring so I can start the project when it thaws out. My daughter is excited to help with this one.
T-5 Cross member
Clutch Pedal set up and roller bearings
Clutch cable set up
Flywheel for 351c 157 tooth 28 oz imbalance
10.5" clutch kit complete
Shifter boot
Trans mount (I understand the C4 and toploader will work for a T-5 but the FMX will not)
Pedal Pad for clutch and brake
Slip yoke 28 spline
Hit me up with anything you might have or other places to source the parts at a discount. Trying to do this on a budget so anything I can save on parts is a plus!
T-5 Cross member
Clutch Pedal set up and roller bearings
Clutch cable set up
Flywheel for 351c 157 tooth 28 oz imbalance
10.5" clutch kit complete
Shifter boot
Trans mount (I understand the C4 and toploader will work for a T-5 but the FMX will not)
Pedal Pad for clutch and brake
Slip yoke 28 spline
Hit me up with anything you might have or other places to source the parts at a discount. Trying to do this on a budget so anything I can save on parts is a plus!