archifx
Active member
- Joined
- Nov 9, 2010
- Messages
- 42
- Reaction score
- 0
- Location
- Florida
- My Car
- 72' Mustang Fastback (Mach1 Wannabe :)
Upholstery Project HALTED! Drivers Side Seat Frame CRACKED! Need Help. Well, the title says it all on this one. After upholstering the passenger seat, I decided to move onto the drivers side seat. I dismantled the seat, removed the existing upholstery and foam and lo and behold the discovery of the cracked lower seat frame. This was extremely disappointing because this will now halt my upholstery project and photos. I had always wondered in the back of my mind why this seat looked a little more “reclined” back than the passenger side… now I know why.
I am attaching a few photos of my newly found discovery and am in need of your help. If anyone has one of these lower seat frames that is in decent condition (no cracks, excessive rust, etc.) please email me: [email protected] I would be more than happy to pay for shipping etc. Take a look at the sadness below.
VISIT MY RESTORATION BLOG WITH OVER 1500 PHOTOS (SO FAR)
[video=youtube]
I am attaching a few photos of my newly found discovery and am in need of your help. If anyone has one of these lower seat frames that is in decent condition (no cracks, excessive rust, etc.) please email me: [email protected] I would be more than happy to pay for shipping etc. Take a look at the sadness below.
VISIT MY RESTORATION BLOG WITH OVER 1500 PHOTOS (SO FAR)
[video=youtube]
Last edited by a moderator: