WTB convertible trim body moldings at base of top, all 3 pieces.

[Horsin' Around]

Nice with no or minimal pitting/checking. Send pix and price shipped to 34654. Thanks.

 

[Motorcity Mustang]

I have a couple pair. Let me check to see if there is any pitting on the edges of the pot metal pieces and will get you pictures

 

[Motorcity Mustang]

Here is the cleanest pair I have. Chrome shines but not perfect, and the curves are starting to get the pops at the end in the pot metal. Not sure if these are good enough for what you need.

 

[MikeGriese]

They can be repaired and replated. A good shop will drill out the asperities and fill them with silver solder before rebuilding up the plating layers.

 

[Horsin' Around]

Here is the cleanest pair I have. Chrome shines but not perfect, and the curves are starting to get the pops at the end in the pot metal. Not sure if these are good enough for what you need.

Here is the cleanest pair I have. Chrome shines but not perfect, and the curves are starting to get the pops at the end in the pot metal. Not sure if these are good enough for what you need.

Sorry for the delay, didn't get popped that there were responses. They look good to me.

 

[Horsin' Around]

They can be repaired and replated. A good shop will drill out the asperities and fill them with silver solder before rebuilding up the plating layers.

Mine were stolen.

 

[Motorcity Mustang]

Mine were stolen.

Let me get you a price for the moldings and shipping.