W will e Well-known member 7173 Mustang Supporter Member Joined May 28, 2011 Messages 3,877 Reaction score 260 Location Phoenix My Car '73 mustang convt. Jan 2, 2014 #2 A 73 with a c6 would have a 1310 u-joint correct?
T Totalled Well-known member 7173 Mustang Supporter Member Joined Sep 5, 2011 Messages 1,864 Reaction score 5 Location Olympia,Wa My Car 73 Q code Mach 1 Jan 3, 2014 #3 Should. Mine does.
C clevelandcoupe Well-known member 7173 Mustang Supporter Member Joined Jul 3, 2011 Messages 748 Reaction score 101 Location Northwest Jersey My Car 1973 Mach 1 original 351C C6 Now 460-4spd top loader 1930 Ford Model A 351C-AOD Jan 3, 2014 #4 Will, I have a couple spares if you need one. Let me know. Thanks, Jay
F Finmach Well-known member Joined Jul 10, 2012 Messages 241 Reaction score 2 Location Finland My Car '72 Mach 1. Ford Racing 460+TKO600+Moser M9 4.11 DL Jan 3, 2014 #5 For 99.9% there's is the 1310 u-joint. U-joints are easy to id, if you can measure their body width and the cup diameter. If the width of the body is the same as 1350 but with the 1310 cup size, then it is 1330 u-joint. http://www.markwilliams.com/shaft-txt.aspx
For 99.9% there's is the 1310 u-joint. U-joints are easy to id, if you can measure their body width and the cup diameter. If the width of the body is the same as 1350 but with the 1310 cup size, then it is 1330 u-joint. http://www.markwilliams.com/shaft-txt.aspx
rafaelmd Well-known member Joined Jul 11, 2016 Messages 49 Reaction score 7 Location Brazil, Paraná My Car 1969 Ford Torino GT 1971 Mercury Cougar XR7 1973 Ford Mustang Mach 1 1975 Ford Maverick Superluxo 1977 Ford Maverick GT Nov 14, 2016 #6 How about a 73 351c + FMX? The u joint? 1310 or 1330?
7 73pony Well-known member 7173 Mustang Supporter Member Joined Jul 6, 2015 Messages 4,367 Reaction score 217 Location Iowa My Car 1973 Mustang Grande 351C 2v Nov 14, 2016 #7 How about a 73 351c + FMX? The u joint? 1310 or 1330? Click to expand... Front or rear? My 73 351c FMX had a 1310 at the trans and a BC1310 at the rear end.
How about a 73 351c + FMX? The u joint? 1310 or 1330? Click to expand... Front or rear? My 73 351c FMX had a 1310 at the trans and a BC1310 at the rear end.
c9zx Well-known member 7173 Mustang Supporter Member Joined Sep 30, 2010 Messages 6,203 Reaction score 1,161 Location Mustang, OK. My Car 1972 Mach 1 Q code 2007 GT 1969 Cougar Eliminator B302 CSX 7000 Shelby Cobra FIA 2020 Edge ST 2002 F250 V10 Nov 14, 2016 #8 Depending on PO changes, it may need this. http://www.dennysdriveshaft.com/p496_1310_ford_rear_to_1330_series_combination_u_joint...neapco_g.html
Depending on PO changes, it may need this. http://www.dennysdriveshaft.com/p496_1310_ford_rear_to_1330_series_combination_u_joint...neapco_g.html