- Joined
- Aug 30, 2010
- Messages
- 324
- Reaction score
- 3
- Location
- Miami, FL
- My Car
- 1972 Mustang Convertible
I have a set of closed chambered 4V bare heads, they need most all the valve seats replaced due to corrosion from water.
If you were going to get hardened seats anyways this set may be ideal. These are the bare castings with original rocker pedestals
They are rough but cheap. Several intake valve seats are corroded, but all holes and threads are good and clean.
$150 shipped to lower 48
If you want a used set of valves and springs retainers and locks add
$25
I have a set of assembled 2V 1972-3 heads that are in good original shape will run as is, but a rebuild is recomended since they have been sitting for years.
$150 shipped to lower 48
Please email me so I cand send pictures
jorgem (at) portsupply (dotcom)
If you were going to get hardened seats anyways this set may be ideal. These are the bare castings with original rocker pedestals
They are rough but cheap. Several intake valve seats are corroded, but all holes and threads are good and clean.
$150 shipped to lower 48
If you want a used set of valves and springs retainers and locks add
$25
I have a set of assembled 2V 1972-3 heads that are in good original shape will run as is, but a rebuild is recomended since they have been sitting for years.
$150 shipped to lower 48
Please email me so I cand send pictures
jorgem (at) portsupply (dotcom)
Last edited by a moderator: