Alright i will post pics (got up early on weekend to get this sucker lined out) in a bit of just what I'm talking about. But a quick synopsis of what happening... AM radio works fine other than presets... all speakers work fine (better than expect actually), so she is wired properly. Alright, the 8-track motor/belt are in fine operating condition (when properly grounded) The head has been cleaned via q-tip/90% isopropyl. The only thing i can think of is that the head is out of alignment needing adjustment... Now there is a part that looks like a threaded end of a bolt with a flat head notch in it that only goes so far in or out, but i cannot see it moving any parts inside the machine. Now let me get some pictures so we are all on the same page. TY in advance!
Heh meant to say i don't know how to adjust the head, but am guessing that may be it, if it is the i believe something else is wrong bc i played with it when it was plugged up last. Also any other suggestions or fixes would be great TY again.
Here's the Pic of what i believe may be the head adjustment, and if it is then I'm pretty lost on what to do next.
Heh meant to say i don't know how to adjust the head, but am guessing that may be it, if it is the i believe something else is wrong bc i played with it when it was plugged up last. Also any other suggestions or fixes would be great TY again.
Here's the Pic of what i believe may be the head adjustment, and if it is then I'm pretty lost on what to do next.
Last edited by a moderator: