Color finally šŸ˜

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I canā€™t remember which one is which and that lighting isnā€™t a good comparison.
This pic the F8 is on the left and the light isnā€™t ideal in it either but a little better.
Oh yeah and thatā€™s a great comparison in the same light. Wow, itā€™s really incredible how they match. Thanks again for sharing this.
 
It does indeed look nice! I am reluctant to give this feedback since it is so nice, and it certainly doesn't matter if you are happy. But if you are super concerned about originality...

I think you may have your hood blackout set too far back on the hood. From the factory it was positioned a couple inches farther forward:

Hood.jpg
 
@Idaho Chris Yeah noticed that, actually why I asked if it was hands free. Tbh, I looks so good, so sharp, I don't think it's reason to regret anything. Seen enough at the "right" one inch above metal fold with too thick secondary lines or wrong curves that were not looking as good as this one.

@70cobrascj "Stencil" is bit vague. what do you get? The outer lines on a giant sheet? 3 pieces (where one is the front with printed shared points for the two other sides having the same shared points and tiny overlap)? I ask because I will likely do mine by hand but was thinking mebbe drawing the front most lines on my computer, let it print by some local sticker shop and simply extend that with good plastic tape or print in 3 pieces as described.
 
It does indeed look nice! I am reluctant to give this feedback since it is so nice, and it certainly doesn't matter if you are happy. But if you are super concerned about originality...

I think you may have your hood blackout set too far back on the hood. From the factory it was positioned a couple inches farther forward:

View attachment 97839
I noticed it too and it donā€™t bother me one bit and I kind of like it. We went off the instructions which stated to remove the front molding and line up the stencil with the front edge but they didnt say what front edge.
 
@Idaho Chris Yeah noticed that, actually why I asked if it was hands free. Tbh, I looks so good, so sharp, I don't think it's reason to regret anything. Seen enough at the "right" one inch above metal fold with too thick secondary lines or wrong curves that were not looking as good as this one.

@70cobrascj "Stencil" is bit vague. what do you get? The outer lines on a giant sheet? 3 pieces (where one is the front with printed shared points for the two other sides having the same shared points and tiny overlap)? I ask because I will likely do mine by hand but was thinking mebbe drawing the front most lines on my computer, let it print by some local sticker shop and simply extend that with good plastic tape or print in 3 pieces as described.
Itā€™s like a big sticker itā€™s three pieces the front piece and the sides are separate. They give you one extra side piece.
Then you mask off the rest of the sides.
 
Last edited:
Back
Top