Floor patch

[6972boss]

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.

Thanks, Rob

 

[N2odart]

317/371/2668 text me a pic of what you need, getting ready to cut up the floor of a 73 Q code. Dave

 

[Motorcity Mustang]

If N2odart isn't able to cut one out for some reason, just let me know. I have one already cut out that I was going to use for myself.

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.

Thanks, Rob

 

[6972boss]

If N2odart isn't able to cut one out for some reason, just let me know. I have one already cut out that I was going to use for myself.

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.

Thanks, Rob

I will let you know. He has been very helpful so far.

Thank you!

 

[N2odart]

I'll have your patch out tomorrow evening, I cut the patch pretty big and I'm thinking the transmission has to come out before I go through the frame part that the trans mount bolts to.

 

[6972boss]

I'll have your patch out tomorrow evening, I cut the patch pretty big and rI'm thinking the transmission has to come out before I go through the frame part that the trans mount bolts to.

Thank Dave! No rush, no worries::thumb::

 

[6972boss]

If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter.  I need to patch this section.

Thanks, Rob

Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat   

Any help is greatly appreciated!

Thanks,

Rob

 

[Bentworker]

If the floorpan is the same reguardless of transmission I can cut the patch out of my 73' coupe parts car.

Let me know by PM. It had an FMX

 

[Motorcity Mustang]

If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  

Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter.  I need to patch this section.

Thanks, Rob

Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat   

Any help is greatly appreciated!

Thanks,

Rob

Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.

 

[Motorcity Mustang]

If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  

Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat   

Any help is greatly appreciated!

Thanks,

Rob

Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.

Here are pictures of the tunnel, drivers seat and the upper drivers hinge plate.  I don't have a 15/15 sway bar (just the normal 3/4)), nor the ginger seatbelts, just black.

View attachment 38129

View attachment 38130

View attachment 38131

View attachment 38132

View attachment 38133

View attachment 38134

 

[6972boss]

Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat   

Any help is greatly appreciated!

Thanks,

Rob

Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.

Here are pictures of the tunnel, drivers seat and the upper drivers hinge plate.  I don't have a 15/15 sway bar (just the normal 3/4)), nor the ginger seatbelts, just black.

Those look perfect! Thank you! And thank you to everyone else who offered up!

 

[Motorcity Mustang]

Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.

Here are pictures of the tunnel, drivers seat and the upper drivers hinge plate.  I don't have a 15/15 sway bar (just the normal 3/4)), nor the ginger seatbelts, just black.

Those look perfect! Thank you! And thank you to everyone else who offered up!

Let me know which seat you would like and if there is a greyhound station close by.  That will be the cheapest way to ship the seat, etc.