- Joined
- Sep 12, 2015
- Messages
- 8,053
- Reaction score
- 3,151
- Location
- SW Ontario
- My Car
- 1971 Mustang Mach 1, M code, 4 speed.
The high pressure power steering hose I bought a few year back as a replacement on my 71 Mach 1, only has a very short piece of foam insulation on it. If possible, I'd like to try to replace this with a longer piece. The problem is I can't find anywhere I can buy the type and size needed. On Amazon (.ca) they do have some foam insulation that would be perfect If it was the correct size. I also tried a local hydraulic hose and fitting company and they had never heard of it, how weird is that.
So gentlemen, does anyone know of where to buy this material? It needs to be 3/4" ID X 1 3/16" OD and I suppose 4 -6 feet long. (In Metric that is 19mm ID X 30mm OD. Actually, 18 mm is closer for the ID)
Any leads welcome. Of course this material must be the type used, not plumbing pipe insulation.
Here's a pic of what I have.
So gentlemen, does anyone know of where to buy this material? It needs to be 3/4" ID X 1 3/16" OD and I suppose 4 -6 feet long. (In Metric that is 19mm ID X 30mm OD. Actually, 18 mm is closer for the ID)
Any leads welcome. Of course this material must be the type used, not plumbing pipe insulation.
Here's a pic of what I have.