yes you will need an alignment. the car will be drivable after the spring change.
one issue depending on your drop will be bump steer, if you find hitting a bump makes the car change lanes without you wanting to then you will need a bump steer eliminator kit, that drops the tie-rod ends below the knuckle about 2". after installing the bump steer kit you will need another alignment as the toe will be incorrect. what happens is ford designed the suspension to work in a range and when you lower the car 1-2" you kind of get into the range ford meant for the suspension to be compressed in but your using it for normal ride height so when you hit a bump it causes toe-out on the side of the suspension that is compressed. so you have lets say 1/8" toe in set, the left side hits a bump and goes to suddenly 1/8 toe out while the right side is still at 1/8" toe in, that is the same and turning the steering wheel suddenly to the left, so that is bad. the bump steer eliminator drops the tie rod down which mimicks the original angle without the drop and thus reduces this bump steer issue. i had this problem when i tried to run 1 degree negative camber to put more performance into the handling with a 1" 416lb spring drop. i bought the bump steer kit but then i changed to 0 camber and put more positive caster which reduced the bump steer issue so i never installed the bump steer kit and gave it away to a friend a couple of years ago.